Sales Tel: 01782 319264 Email:






Product Detail

  • Overview
  • Stronguard™ Cantilever – manual to fully automated.

    A range of high quality access controlled gates suitable for sites that require operational safety and security.

    This range integrates seamlessly with the complete range of Barkers Fencing perimeter security systems and harmonises with all styles of existing or new boundary installations, with an extensive choice of widths and heights and an almost endless array of infills.

    Barkers Fencing can customise the Stronguard Cantilever Range to suit every application, and tailor each product to satisfy individual requirements.

    Stronguard Cantilever gates are delivered to site pre-assembled for quick and easy installation to existing foundations.

  • Dimensions
  • Single leaf widths
    Available in widths from 3m to 7m

    Double leaf widths
    Available in width from 6m to 14m

    1.8m, 2.0m, 2.1m and 2.4m

  • Specifications
  • Standard Sizes

    Gate Height (m) 1.0 1.2 1.8 2.0 2.1 2.4 3.0
    Single Leaf Widths (m) 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0
    Double Leaf Widths (m) 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0


    Tops Forged
    Infill Flush Serrated Square Mitred Head TPT R&N Single Pointed
    25 x 3 CHS Y Y Y Y Y
    25 x 25 x 2 SHS Y Y Y Y Y
    W’ PALE Y Y Y Y
    D’ PALE Y Y Y Y
    MESH Y Y
  • Options
  • Manual Cantilever gate
    The gate is opened and closed by hand, and locked using a euro cylinder type lockinox lock and key.

    Dead Man Cantilever gate
    The gate is powered by an electric three phase motor which operates via a dead mans switch i.e. a key in inserted and turned towards desired directions of movement. Once the hand is removed from the key the gate stops dead.

    Automated Cantilever gate
    Powered by an electric three phase motor, which opens and closes without supervision. This option can be controlled using various access control systems i.e. card swipes, remote control key fobs, ground loops, coded key pads, intercom systems, camera intercom systems, iris readers and finger print readers. The gate opens to allow entry and closes automatically after a pre-set time (e.g. 20 seconds). For safety reasons all automated gates must have safety edges on both the gate leaf end and on the fate support post. An infra-red beam is also required for additional pedestrian and vehicle protection. If at any time during the closing of the gate either the infra-red beam of the safety edges sense an obstruction in the gateway, the gate will stop and re-open, and after a pre-set time re-close.’

    Download Brochure

    Download Datasheet